36 Watt (3 Amp) 12 Volt DC LED Light Strip Power Supply (white) - 110V AC to 12V DC Transformer - Driver for LED Tape Light and Other Low Voltage Devices (Security Systems, Cameras, and More)
Thumbnail 1Thumbnail 2

36 Watt (3 Amp) 12 Volt DC LED Light Strip Power Supply (white) - 110V AC to 12V DC Transformer - Driver for LED Tape Light and Other Low Voltage Devices (Security Systems, Cameras, and More)

3.7/5
Product ID: 15245903
Secure Transaction
Frequently Bought Together

Description

  • 12V DC OUTPUT FOR LED LIGHT STRIPS or any other low voltage devices, such as security cameras, audio/video gear or automotive equipment.
  • RATED FOR 36 WATTS / 3 AMPS - Enough power to run a full roll of 150 LED 5050 light strip. See also our larger power supplies (up to 150 watts).
  • PLUGS DIRECTLY INTO YOUR WALL OUTLET, no hardwiring and no electrician required. Four feet of output cable and a standard 5.5 x 2.1mm DC jack (positive tip) make one step connections to most single color LED light strips, dimmers, or RGB controllers.
  • HITLIGHTS QUALITY. Backed by a one year warranty from HitLights for peace of mind. Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.

Our 12V DC power supplies provide the power you need to light up your LED light strips or other low voltage devices by converting your 110-240V AC power to the 12V DC that LED strips run on. They're available in various power ratings, from 36 Watts to 60 Watts and in various styles, from compact models that plug directly into your wall outlet to larger units capable of powering several rolls of strip.36 Watt Power SupplyProduct Features : Easy plug and play installation 1 year warrantyInstallation Instructions : Plug AC Cord into wall outlet Connect DC output plug to DC input plug on your LED light strip, controller or dimmerSpecifications : Input : 110V-240V AC - (Direct wall plug - standard North American NEMA 1) Output : 12V DC / 36 Watts (3 Amps) - Four foot output cable with 5.5 x 2.1 mm DC jack Dimensions : 36 x 85 x 47 mm (1-3/8 x 3-3/8 x 1-7/8 inches) Part Number : PWR-12V-036-30-BK / 120300

Reviews

3.7

All from verified purchases

A**N

Hitlight 36 Watt White Power Supply for SMD3528 LED Strips

These Hitlights 36 Watt Power Supplies (white) worked well with the Hitlight SMD3528 LED strip lights. I used the white 36 watt power supplies instead of the usual black 24 watt power supplies because the white plug looked better in my kitchen for the under the cabinet lighting. The white plug is less noticeable. So far 3 of 3 are working fine, but its only been a few days.

J**E

It works but not great

This product does work I have only had it about a month running a five foot led strip I have about a three second delay. It could be the driver or it could be something else I'm not quite sure with a five ft strip there is very little draw.

M**B

Works well to power a short length of LED tape ...

Works well to power a short length of LED tape lights. Also, the price is right. Only complaint is the 3 second delay from switch on to lights on. This is not the case with another brand of power supply.

R**N

Dead after a couple weeks

Received Feb 26. Installed at the end of March and it was working fine. Yesterday, April 12th it was no longer working. This product sucks. I see others have had them die way too soon also.UPDATE: I contacted the seller and they promptly sent me a replacement at no cost to me. This is very good service! Much appreciated. Hopefully the replacement (same model as the first one) lasts longer.

W**.

Works, but slow to come on after AC power is applied.

I bought this to be switched by an AC motion detector. It works but it's VERY slow to switch on when AC power is applied, two to three seconds, which is unusually long for a solid state transformer power adapter.

O**.

Not 12 volt output at all!! --- 11 ...

Not 12 volt output at all!!--- 11.1 volts with no current--- 8.3 volts with 1.5A currentBut has not broken down yet.

G**L

no issues, good plug

bought it for led strip plug in set up. using it in garage. its a bit a pain to plug in to wall, but its simple and does the trick.

D**D

Not 12V output.

It should be a 12V output, I purchased two of these and both have an output of 11.2 volts. With certain LED strips, that becomes problematic and causes flickering not far down the strip. If you are doing any significant install of LED strips, dont use these for more than about a 4' run.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Currently out of stock

Belgiumstore

Sorry, this item from our Belgium store is out of stock. We're restocking soon—check back or contact support for similar products.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

36 Watt 3 Amp 12 Volt Dc Led Light Strip | Desertcart Belgium